Element Gasket
Uncategorized November 11th. 2009, 12:46pmElement Gasket
 |
 AMERICAN 6901688 ELEMENT GASKET ANODE KIT TINY TITAN  US $18.50
|
 WATER HEATING ELEMENT BOLT IN FLANGE GASKET KIT PROPLUS US $8.00
|
 WATER HEATER ELEMENT FLANGE GASKET 1 5 8 OD X 3 8 THICK HEAVY DUTY US $2.99
|
 WATER HEATER ELEMENT SQUARE FLANGE GASKET 25X25X 1 8 HEAVY DUTY US $2.99
|
 MARATHON 3800W Lower Heating Element SP212770 w Gasket US $44.99
|
 Element Gasket Kit by Reliance State Ind 9000443 US $7.99
|
 STATE 9000443 UNIVERSAL HEATING ELEMENT GASKETS US $2.85
|
 Giant SEPARATE GASKET square flange type round 18G0005 hot water heater elements US $2.25
|
 Giant SEPARATE GASKET square flange type elements flat 18G0002 hot water heater US $3.24
|
 UNIVERSAL FLAT FLANGE WATER HEATER ELEMENT WITH GASKET 3000 WATTS 240 VOLTS US $2.99
|
Why are people dumb enough to give money to panhandlers?
I'm as liberal as they come, but the idea that people would hand out money to some schmuck makes me want to blow a gasket.
Obviously, if nobody gave to panhandlers, then there wouldn't *BE* any panhandling in the 1st place because the panhandlers would be wise enough to know that they weren't going to get any money. So, obviously, they're able to make a pretty good living at this because they're willing to stand outdoors exposed to the elements (sun, rain, heat, etc.,) to beg for money.
If an individual stands at a busy intersection for eight hours a day, then at least a couple of thousand cars must pass by during that time. If every person in those cars gave even just a nickel, just think how much that would add up.
2000 cars * $0.05 = $100 per day.
And remember now: that money is tax-free. Also remember: I'm using very conservative figures. You could easily find an intersection with a lot more than 2000 cars per 8 hours. And a lot of folks give much more than 5 cents.
This might piss you off even more. I remember seeing on one of those news shows like 20/20 or Dateline that some panhandlers make like 30,000 a year just begging. Some of those guys are not homeless they just beg for a living. I saw the story a few years ago they probably can make nore now.
Water Heater Leak? You May Be Able to Fix it Yourself
If your water heater has developed a leak, you will need to check where the leak is coming from before you can try to fix it. You may have to replace the water heater altogether if it is an older heater. There aren't many causes of water heater leaks that can be fixed, but we will discuss how to fix the problems you can. Before you begin, you will need to have some tools handy. These include a screwdriver, some hose, a bucket, a wrench and some sealant. Once you have assembled all your tools, take a look at the water heater. If the water is leaking from the tank, you will need to replace the whole water heater. If the fittings or pipe is where the leak is located, you can probably fix it yourself. Now that you have assessed that the leak is not from the tank itself, you will need to prepare to fix the leak. First you will need to shut off your power.
If you have a gas water heater, then shut off the gas. This is a safety measure that needs to be followed. Before you begin any repair, do this first step! Next you will need to shut off the water. You can easily do this by shutting off the in-line valves that are close to your heater. Then you will need to employ the sillcock valve at the bottom of the heater. Attach the hose and allow everything to drain either outside or down a drain. You do this to relieve any pressure that has built up inside the tank, and you will need to allow some time to pass before you proceed. Once the pressure has been relieved, disconnect your water intake and output by unscrewing the unions on the heater. Use your bucket to catch any water that may be left. Once all this has been done, you can use your wrench to tighten the fittings and valves. You may want to remove these items first and apply the sealant to the threads before tightening them back up. This should have fixed any of the leaks you had, and once everything is tightened up, you can then turn the water, power and heater back on. If your water heater still has a leak, there may be another possibility that can be causing it. If it is your temperature release valve that is leaking, you will need to call an experienced plumber to fix the problem. Doing this type of repair yourself if you do not know what you're doing can easily cause an explosion. Another option would be to tighten the drain valve.
Check the drain valve and see if this is where the leak is coming from. Lastly, check the heating element gasket. If you need to replace this, you will have to turn the water supply off and drain any water that is in your water heater. The gasket can easily be replaced. Before you turn the water heater back on, you will need to run hot water through a kitchen sink to remove any air that may build up inside the heater tank
About the Author
If you are looking for a
San Francisco plumber
who kows how to fix a
at a reasonalbel price call Magic Plumbing. Their plumbing technicians are also experienced with tankless water heaters.
Parametric Analysis of Bolted flange with gasket, contd....
